.:: Tyfoon nebulizers::.
for ICP/AAS standards
.:: Related links ::.
.:: Laboratory News ::.
Tyfoon Nebulizers are supplied - as standard - with connectors for sample tubing and argon supplies. Selections of connectors and accessories available from EPOND Switzerland are shown in the pictures below :
The letters indicate the following -
(A) the reknowned RubeTube, for simple connections of (ST) sample tubing
(AH) flexible Tygon tubing for argon and other inert gases,
(B) a Barbed connector, for joining flexible gas tubing to 4-mm 'quick-fit' connectors.
(C) an Argon Tube Clip - for fastening (AH) to (D), for example
(D) a right-angle 'quick-fit' connector for flexible tubing to 4-mm pneumatic tubing, Part No. 31990400.
(E) a right-angle 'quick-fit' connector for 4-mm to 4-mm joints, Part No. 31020400.
(F) Press-Fit connector for 2-mm-ID flexible tubing.
(FV-4) a Festo valve with 'quick-fit' couplings for 4-mm flexible gas tubing
(G) Press-Fit connector for 3-mm-ID flexible tubing.
(H) 'quick-fit' SMC connector, Part No. KQ2H07-00. For 0,25-inch OD tubing.
(J) an EPOND 'NebLink' sample tube connector with PTFE sample tubing
(K) a Festo 'quick-fit' connector for 4-mm gas tubing, Part No. QSM-4.
- functionally equivalent to (S).
(L) flexible pneumatic hose, 4-mm outside diameter, 2,5-mm inside diameter.
(M) an EPOND argon flow-limiter, rated at 0,10 litre/minute/bar.
(P) a polymer 'plug', for 4-mm pneumatic hose terminations.
(R) an EPOND 'DrainLink' connector for spray chamber drains, with PTFE sample tubing.
(S) a 'quick-fit' connector for 4-mm gas tubing, Part No. 31060400. Functionally equivalent to (K).
(ST) PTFE sample tubing, available with 1,6-mm and 1,3-mm outside diameters and various internal diameters.
(T) a 'quick-fit' Tee-connector for 4-mm gas hoses, Part No. 31040400.
(TC) a metal clip for attaching RS-13/5 couplings, as for spray-chamber to torch.
(Y) a 'quick-fit' Y-connector for 4-mm gas hoses, Part No. 31400400.
* prices for these connectors are shown in the
'No-Break nebulizer' site